The majority of the time, gun safes are made to be strong. However, you must consider how it will be anchored down if you are placing one in your home. You need something strong and sturdy to prevent it from being tipped over by a burglar or an earthquake. Because it must be strong enough to support the pressure and weight of the gun safely, a sturdy anchor is essential when using one. Steel rods and rebar cages are just a couple of the various types of anchors that can be employed, depending on the demands of your property.
Before choosing the appropriate type of anchoring, you should consider how much pressure your gun safe must be able to support. No special anchors are required if the safe is just under 1000 pounds, although we do advise installing them with the proper hardware if it does (e.g., lag bolts). You should make your gun safe as secure as it can be in case of a break-in.
What To Consider When Choosing The Best Gun Safe Anchors
It might be just as exhausting as buying the weapon itself to find decent anchors for your hidden compartment. However, there are important elements to take into account when selecting the ideal gun safe anchors.
Where They Would Go
You should first think about where to install the safe anchor bolts: on the floor or on the walls? The fact that you are aware of the load values in which the safe anchors would be held makes this aspect crucial. In addition to all of this, remember to pre-drill holes for the safe anchors.
Anchors for gun safes exist in a variety of sizes, with smaller ones made exclusively to hold handgun safes and larger ones made to support long guns and other types of safes for firearms. Before purchasing anchors, you should take measures to determine the dimensions of the gun safe. You may obtain the strongest anchors for the gun safe with the help of this factor. The safe anchor bolts’ diameter determines how much holding pressure they can withstand; the larger the diameter, the better.
Two characteristics of the top gun safe anchors are their thickness and length. Because of the stability of the safe anchor, you may securely anchor your gun safely to a wall or the ground for an even higher level of security.
- Stainless steel is a specially made safe anchor that will hold your gun safely. The 304 stainless steel used to produce the stainless steel anchors make it resistant to rust and corrosion. It has also been shown that when used, this safe anchor can sustain more pressure. They are some of the greatest anchors for your gun safe because they come in a variety of sizes and blend in with flooded and damp environments.
- Carbon Steel is constructed from carbon steel and is zinc-plated. This secure anchor can only be used on concrete; it cannot be used on blocks or bricks. The safe anchor has a zinc-plated construction that makes it resistant against corrosion and rust. This anchor is only appropriate for dry environments. Additionally, they are available in a range of diameters, giving the bolts the precise fastening effects. When looking for the toughest anchors for your gun safes, this zinc-plated anchor is a good choice.
- Metal made. Because they are composed of metal, they are strong and have a high-quality finish. This anchor secures your gun safe to a wall or floor and wins the title of best gun safe anchor. Gun safes can be fastened to brick, block, concrete, and cement, to name a few, with this safe anchor. It is impossible to overstate how convenient this anchor made of metal is. The anchor can easily pierce through hard surfaces due to their weight and thickness. These safe anchors may be used in different climates and are resistant to rust.
Types Of Gun Safe Anchors
Anchor and plug with a wood thread
Many approved safes manufactured outside of Europe come with wood threaded screws and anchors. These are frequently the items that fall under the (outdated) NCP Safe classification. If this anchoring technique is effectively used, a resistance of roughly 80 ndash;100 kg is obtained. The values, however, are less in reality.
In comparison to a wood threaded bolt and plug, a mechanical anchor provides a significantly higher tensile strength. Tensile strengths of around 1400 kg can be attained with a 16 mm anchor with proper installation in concrete. This anchoring technique makes use of a safety margin of 1.5. In actual use, the strength will indeed be roughly 1.5 times higher.
A chemical anchor provides the greatest tensile strength when used for anchoring. This anchoring technique requires specialized knowledge and meticulous execution. Before being loaded, the anchoring needs to solidify well. If everything is done correctly, a 16 mm anchor can produce tensile strengths of approximately 2100 kg. The safety factor used in this anchoring technique is 3. The force will be roughly three times stronger in practice.
How We Chose Our Top Picks
We began by looking for the top-rated anchors on websites for independent dealer shops as well as online stores like Amazon and Home Depot. Anything with a poor reputation was ruled out.
Safe anchors in the price range we were looking for had to be of good quality, but they didn’t have to be cutting edge (which is why all of our choices had a solid reputation). Only items that met or above expectations in terms of security, fire protection, and longevity were considered for this review guide. The bulk of the safe anchors on our list include numerous layers of security, a robust construction, and are simple to install.
Frequently Asked Questions About Gun Safes Anchors
What is the most difficult gun safe to break-in?
Most experts agree that it’s not a lockable gun safe. That said, there are tons of different types of locks and security systems out there, so finding one that fits your needs can be tricky.
How much do gun safes cost?
Prices vary widely depending on materials used, size, and brand; expect to pay between $200 and $400 for a small portable model, with larger floor models costing closer to $600 to $800. Premium brands like Vaer will cost more than cheaper ones, but quality usually comes with a price tag commensurate with its worth.
Are gun safes legal?
That depends entirely upon where you live. Certain states have laws restricting or prohibiting their use, while other states only require you to lock up your firearms when they’re in plain sight.
Can I use epoxy to fill the hole before securing the anchor for the gun safe?
Contrary to popular belief, gun safe anchors work great without resins. Installing the safe anchors directly into the hole is okay to do.
What Concrete Anchor is the Strongest?
One of the most crucial parts of a foundation is an anchor, which must be correctly constructed and planned to assure stability. Steel reinforcement is frequently regarded as the strongest anchor for concrete foundations due to its ability to endure heavy loads and high temperatures. Galvanized steel wiring anchors are also sturdy enough to be used in specific locations where corrosion can be a problem.
Do you need to anchor a gun safe?
Your safe should always be anchored to the floor. When your safe falls over, anchoring involves avoiding damage to your property and mishaps that could injure or even kill a loved one. If you’re hesitant to drill bolts into your floor, think of the harm that a falling 1,000-pound safe could cause.
Can you anchor a gun safe to the wall?
The greatest alternative to bolting the gun safe to the ground, particularly if you are renting, is to fasten it to the wall. When you relocate, it is simpler to patch a few little holes in a wall rather than needing to replace the flooring or carpeting.
Where is the best place to mount a gun safe?
Although the closet in a bedroom can be used to store the gun safe, the basement is still the best option. Since the criminal would have to pull the gun safe up the stairs, they are typically overlooked by thieves and difficult to steal.
Can you put a gun safe on concrete?
Concrete flooring is undoubtedly sturdy. These flooring can support heavy loads, even the biggest gun safes, when used as the foundation for a house without an underground or crawlspace. For safe installation, they are a great option.
How do I know what size anchor bolts to buy?
The size of the male anchor can be calculated using a straightforward calculation by combining the diameter of the object being secured, the minimum thickness of embedment required for the size of the anchor bolt, the thickness of the washer, and the thickness of the nut.
How deep should my anchor bolts be?
In order to ensure that the anchor will go through the base material, drill the hole 1/4″ to 1/2″ deeper. Once the anchor is put into the hole, any object may fall because of this. The hole must be cleansed of any dust, debris, or other materials once it has been drilled.