Ar 15 Lube
For the average person, an ar 15 lube might mean only one thing: "hot" lubricants for your hand or car. This is understandable, given that this type of lubricant is often needed in very high temperatures and extreme conditions. However, when buying from a major manufacturer such as Armani, you'll get more than just standard water-based lubricants. Instead, you'll also be treated to products with special properties and capabilities, such as Mira oil, Nivea oil, and PVD (PVD) oil.
Let's start with the most common type of lube, water-based. So, what makes water-based lubricants better than regular oil-based lubricants? First of all, oil tends to lose its viscosity (thickness), which results in it leaking at faster rates, and thus increasing wear and tear on your car or truck. Also, water-based lubricants have higher boiling points, which allow for much better thermal conductivity. So, from a performance perspective, they perform best when compared to oil-lubed products.
Next, let's take a look at oil. As the name suggests, oil is generally stored in warm temperatures. So, if your car needs an oil change after an outing on a hot day, you might get tempted to just park your vehicle in a hot car wash and use the old stuff. Although this might work to a certain extent, there are plenty of benefits that go along with storing your vehicle in a cool place, specifically between 120 F and 150 F. Among other things, lower temperature means a lower boiling point of the lube. Thus, a 2 oz bottle of Armani might get a nice reaction while a 1 oz bottle of Nivea may not.
Another benefit associated with storing oil is that it tends to attract a more complex and unpleasant odor. The reason behind this is that the oils tend to get mixed with bodily proteins like muscle and skin oils. Therefore, even after they dry, they will still have an unpleasant smell. This is because the oily molecules of the lubricant attract sulfur molecules in the air, as well as amino acids in the ground. In addition, glycerol, which is a component of many lipids, tends to stick to the surface of the lube as a result of the friction caused by the oil, which leads to a pungent smell.
Now let's take a look at another potential alternative to the traditional lubricant: Clairspray. This is actually a very good lubricant, but it has one major drawback: it stinks. While you can brush it on as normal, and you may have success cleaning it off, in the end the greasy residue that builds up on the surface of the lube is going to be very difficult to remove. Therefore, if you're trying to decide between Clairspray and the classic oil method, perhaps you should consider storing your oil in a stainless steel Ziploc container that's airtight, and that you can clean out on your own.
To make a long story short, our Grizzly Lube review team did find one issue with using Clairspray to store oil: the greasy residue issue. Therefore, when trying to decide between Clairspray and the conventional oil method, it may be a good idea to make a point of storing your lube in an airtight container. This way you won't have to worry about the surface stinking. Moreover, the idea of using the m-pro best lube powders was discussed in our m-pro review, and we encourage you to read that article for more information.
After running a number of tests, we found that both the Zippo and the oil method worked equally well at removing alloys, copper, brass, and stainless steel. In fact, in our Clairspray inspection, there was barely any smell at all. The biggest issue was found with the zinc-coated oil droplets, which were significantly less smooth than the plastic coating on the same gun. Despite this slight issue, the Zippo is still the clear winner when it comes to function and price. While this might not mean much to some individuals, the fact that it's so easy to clean and it doesn't smell makes this unique tool well worth the investment.
Overall, this test concludes that both the Zippo and the oil method perform equally well, and this means that either method will provide you with the lubricant that you need. If you have any doubts about what type of lubricant you should use on your AR 15, however, we suggest that you consult the user's manual. In particular, the step titled "Ballistol Test" describes the recommended lubricant for your specific gun. Regardless of which lubricant you choose, however, don't be disappointed if after using one of these tools that you discover that your ball points continue to jam.