Buyer's Guide: Keymod Rail Covers
Keymod rail covers protect your Keymod gun from accidental firing. It is possible that an accident could occur, even though this protection has been included in the design of your Keymod rail. These accessories are easy to install, thanks to a variety of manufacturers. But, incorrect installation can lead to disastrous results. It is crucial to ensure safety when installing your firearm.
It was originally designed to replace the mil-spec Picatinny Rail. It's name is derived from its key-shaped mounting holes, and a reference it's modularity. KeyMod is based on "Negative Space" Mounting, where accessories can be directly mounted to handguards. This is in contrast to other mounting methods that rely on an intermediary interface such as the rail slots on Picatinny. Picatinny accessories still dominate the market can be used with KeyMod rails by adding Picatinny rail strip to the rail.
It is a good idea to hire a professional if you don't have the necessary skills to install Keymod accessories. Although it might cost more than you want, this will ensure your gun is properly installed and all potential dangers are addressed. Follow the instructions when installing any device.
It is a good idea practice installation at home before you start. Take out all accessories and packaging. Test your firearm once it is installed. It is also important to practice using the keymod accessories. When using your gun, make sure to wear ear protections.
- First, you'll notice that Keymod rail covers have a different installation process than others. Accessories attach to rails so they are often sold in sets. Kits are not all created equal. Make sure you choose the right kit for your firearm model. These kits make it easy to install your firearm quickly. A kit made for your gun will save you time and help you save money.
- After you've found a suitable rail cover, make sure to read the instructions. Most rail covers will need to be installed over the shank, a longer piece or metal. Follow the instructions. These instructions are often easy to follow. You can then test the gun for functionality after installing the rail covers.
- It is important that you pay attention to the bolts or screws that attach your Keymod accessory to the gun when installing it. These bolts are essential for proper installation. It is crucial that you tighten them with care. The screws can come loose or jammed if you make even the smallest adjustment.
- It is important that you follow all instructions when installing your Keymod accessory. You may find specific instructions on what tools you will need and how far to place the accessory. Sometimes, the manufacturer will provide the tools. You may also need to buy tools at a local hardware shop.
After the installation is completed, make sure you maintain your gun regularly. To ensure that the trigger works properly, test it. To maintain the appearance of the rails, paint them. Use lubrication if necessary. Keep a spare clip or insert handy.
Keymod rail covers are one of the most sought-after modifications for guns. They can have some advantages over other accessories but they can also be disadvantageous. It is important to remove rail covers regularly, inspect for damage and then replace them as necessary. This will help prevent accidents. This will ensure safety and maximum performance.
Although it is easy to install this accessory, there are some issues. Follow the instructions provided with the product. If the instructions are not followed carefully, even the most experienced loom operator may have trouble installing the product. Unintentional delays or additional expenses could occur.
Make sure accessories match your gun when you are shopping for accessories. You want it to work well and look great. A universal fit rail cover is a great option, but you should also consider one that can be used with other models of your gun. Be sure to buy a replacement set if you have more Keymod guns than one. It is impossible to have enough protection for your valuable possessions.
Rail covers protect rails from scratches and nicks that could make them unusable. They also protect the hand as rail sections can be very sharp. Rail covers can also change the look of the gun. You can also choose from a variety of colors, including black, tan and olive drab.
This system has the greatest advantage of all: you can only add rails and accessories where you need them. The handguard isn't weighed down by the extra space that you don't need. Attaching an accessory to KeyMod rails is easy: An accessory (or rail strip) contains a keyed nut that holds a larger shoe and is attached loosely to the rail. Next, place the larger shoe in the KeyMod hole section and push forward. After the shoe is pushed forward, the screw can be torqued so that it pulls the shoe towards rails or attachments and is locked into place. You will have the rail sections or accessories for direct mounting gun accessories. Picatinny is more limited in their versatility than KeyMod rails. Picatinny can only be mounted at the 12, 3, 6 and 9 o’clock positions. KeyMod rails are more flexible than Picatinny. Certain KeyMod rails can be mounted at 45 degrees points, or at 2, 5, 8 and 11 o’clock positions.
Although there are few negatives to KeyMod, one thing that stands out is the direction it locks. The accessories or rail are pushed forward and locked down. However, if it is pulled back enough like a foregrip it could disengage. Some argue that the key holes should be facing the opposite direction so you pull towards the locked position and not away. One minor complaint is that keyhole-shaped cutouts have two sharp edges. If you have fleshy hands your skin could squeeze into the cutouts, which can cause discomfort. It's still your decision!
Is KeyMod that bad?
KeyMod accessories feature low-profile fasteners. KeyMod has been used worldwide by special operations units, and nobody was killed because of KeyMod."" KeyMod will work for 99.9% of people.
Is M-LOK better than KeyMod?
M-LOK and KeyMod performed well most of the time. M-LOK rifles can be dropped to the ground, and the attachments will stay attached 100% of the time. However, it had a 33% success rate for KeyMod.
Are KeyMod rails good?
The KeyMod system allows users to place MIL-STD-1913 railroads anywhere they are needed, even in 45deg positions. The KeyMod system is made up of two parts: the KeyMod slot and the KeyMod nuts.
Can you convert KeyMod to MLok?
GOTICAL Keymod converts Keymod Handguard into Mlok. GOTICAL Keymod adapter to MLok is used for Mlok accessories on Keymod Handguards. It is 6061 aluminum and hard anodized.
What is KeyMod rail system?
KeyMod, a recently released standardized rail system for attaching accessories on your rifle or AR-15, is now available. KeyMod's modular rail system allows for accessories and rails to be attached or removed at specific points.