Types of Rifle Scope Mounts For Your Rifles
If you own a rifle and shoot regularly, then the chances are good that you've used some rifle scope mount. Whether it's a binocular type or an adjustment type, rifle scope mounts are essential to safely and accurately shoot your weapon. This article will discuss how to properly mount a rifle scope to avoid problems in the future. Hopefully, this information will help make sure your rifle scope is working the way it should.
Riflescope rings are the most problematic component of a rifle scope, by far. Many times, weaver mounts are too large to fit on the rifle comfortably, thus resulting in discomfort, problems with getting the scope to focus, and frustration during use. The solution to this problem is to purchase a smaller weaver mount or upgrade the scope rings to something a little more comfortable. Riflescope rings and weaver mounts can also be easily changed if needed.
Riflescope mounts are typically attached to the bottom of the gun with one piece of equipment. There are two types of mounting: bolt-on and quick-change. Bolt-on mounts usually use a small nut to attach the ring, while quick-change mounts use a larger screw to connect to the rifle's side of the grip. They are usually purchased as a complete unit but can also be purchased as separate pieces. A quick-change mount should permanently be installed by a professional, as improper installation could damage the firearm.
Regardless of which type of mounting system you decide on, consider several things before purchasing. The primary thing to consider is whether you will need the mounting system permanently installed onto your gun, or if it will be used intermittently and then taken down after shooting. Permanent installation is usually only required for hunting cameras and other precision-built accessories. If you are looking at Rifle scope mounts that will need to be removed regularly, you will want to find a system that will allow you to take them down with one hand and easily move them to a new shooting location, then snap them back into place. This is especially important if you use your rifle scope during long-range shots since the mechanism that holds the mounted accessory is extremely small.
Once you have determined the type of scope or mounting system that will work best for your needs, the next step is to select the appropriate base for your new scope. Although there are many different Rifle scope mounts available, the two most popular are subsonic and vibration resistant. Although these two systems provide similar results, they differ slightly in terms of what they can support. If you are using a subsonic mount that offers extended comfort and accuracy, you will likely have no problems with the accuracy of your shot. However, it is important to note that these Rifle Scope Mounts tend to be less stable when taking target shots.
The third type of Rifle Scope Mount you may need to choose from is the rear ring, the most simple and basic scope mount. These particular models do not offer a significant amount of versatility for mounting accessories or moving them around. The drawback to this specific type of rifle scope mounts is that they provide only a little bit of adjustability regarding the elevation and windage, making them poor choices for hunting or targeting purposes. In addition, if you are going to carry accessories on your rifles, like extra ammunition or laser targets, it is not necessary to purchase separate windage or elevation stands for each different range that you will be taking your shot from.
If you are in the process of evaluating whether or not you will need to purchase a new scope, you must consider the amount of space that you have available for a new mount. Not only do you have to make sure that it will fit into your handgrip, but you also need to ensure that it is sturdy enough for your gun. If you cannot test out your new scope with your gun before purchasing it, you should be able to test it out during the installation process.
The last type of scope that you may encounter is the one-piece mount. While these typically offer a lot of flexibility when mounting them, they generally are less expensive than two-piece mounts. Typically, a one-piece mount comprises one frame with a one-piece housing holding up the scope. Once the scope is installed, it can then be secured into the housing with internally threaded screws. Generally, you can opt to purchase one-piece scope bases that come pre-assembled, or you can choose to buy one that is not pre-assembled. If you are not an experienced rifleman, it is generally best to opt to go with one-piece mounts because you will have more leeway when it comes to adjusting them based upon the type of shot you are taking.