How To Fit Your Metal Ammo Can Saddlebags
If you want to look like a tough man and shoot your gun like one, then you need to have some metal ammo can saddlebags. But you have to know the right way on how to make them. Although there are some ways to make this kind of saddlebags, it is still not as easy as you think it is. Because this saddlebag are made from metal, you need to know the right way on how to protect them from different weathers and how to clean them. So, take a look at the following tips that will guide you on how to make metal ammo can saddlebags.
The first thing you have to do when looking at how to make metal ammo can bags is to determine the right material. You can choose between different materials. They are either made from plastic or metal. This means that you have to decide which one will suit you better. It is actually up to you.
After you determine which material you will use, you can now look for the right tool that you need for your saddlebags. You can choose between tools that will help you assemble or the tools that will help you disassemble them. There are both types that you can choose from. Just make sure that you get the right one for what you are doing.
The next step you need to do is to cut the desired shape you want your saddlebags to have. You can do this by cutting along the seams or cutting out the excess material left over. Make sure that you leave about 1 inch from the edges so that your newly made saddlebags will fit perfectly with the clothes that you will put inside them.
Then, you can finally measure the proper size of your metal ammo can. You have to make sure that the dimension of the metal is correct so that the saddlebags will be able to fit on your motorcycle properly. This is important so that your motorcycle bag will be secured and safe. This is also why you have to make sure that you know the exact size before you start making it.
To ensure the proper fitting of your metal saddlebags, you can start by looking at the top part of the metal. You have to look at how closely the top parts are attached to the rest of the metal. If you see that they are sewn or glued together, you must remove them and discard them. This will ensure that the saddlebags will be appropriately sewn with the right sides together and perfectly aligned.
After you have done that, you need to look at the bottom part of the metal. You need to check how tightly the bottom parts are glued or tied together. If there are holes, you need to fill them using primer. This will make sure that your saddlebags are well-fitted and properly secured to your motorcycle.
After doing all those, you can proceed to the next step. That is, you need to look at the screws that are located on the bottom of your metal saddlebags. Make sure that they are all in their proper positions and are all in working condition.