GLS Shooting Logo
Disclosure
This website is a participant in the Amazon Services LLC Associates Program. We are reader-supported. If you buy something through links on our site, we may earn an affiliate commission at no additional cost to you. This doesn't affect which products are included in our content. It helps us pay to keep this site free to use while providing you with expertly-researched unbiased recommendations.
The Best

Pellet Gun Oil

Handpicked
Quality-Checked
Bestseller No. 1
Crosman 241 Pellgunoil Air Gun Lubricating Oil (.25-ounce)
  • FOR USE WITH CO2 AND PNEUMATIC PUMP AIR GUNS
  • PREVENTS RUSTING AND KEEPS SEALS FROM DRYING OUT - See...
  • "TAKE IT OUTSIDE" with Crosman
Bestseller No. 2
MicroLubrol ARMASIL High-Perf 100% Silicone Oil for Airsoft...
  • 100% Silicone Oil - NO petroleum distillates or ANY...
  • Exceptional high-temperature stability during CONTINUOUS use...
  • Viscosity exactly between that of 20wt and 30wt oil.
Bestseller No. 3
Gamo AIR GUN OIL CLAMPACK 621242754 Care & Maintenance
  • Maintain your gun with Gamo Air gun oil
  • The recommended oil for your Gamo airgun
  • 2 fluid ounce
Bestseller No. 5
Gamo Air Gun Oil
  • MAINTENANCE AND CLEANING
Bestseller No. 6
Umarex RWS Air Gun Chamber Lube, 0.5 Ounce, Chamber Lube
  • Specifically formulated to keep your airgun in top condition
  • Silicone oil
  • Safe to use on any airgun powerplant -- even PCPs
Bestseller No. 7
70 Shooting Targets: 8.27" x 11.69" | Silhouette black |...
  • Shooting Targets, US Publishing (Author)
  • English (Publication Language)
  • 140 Pages - 12/16/2019 (Publication Date) - Independently...

Buyer's Guide: Pellet Gun Oil

Pellet Gun Oil - How to Fix Your Guns Quickly?

If you are searching for good quality oil, then it is best recommended to go for pellet gun lubricants. Pellet gun lubricant is the liquid oil that you need to apply on your pellet gun. However, this type of oil may contain harsh chemicals that may harm the gun. Therefore, there is a need to determine the type of gun lubricant to use. Before you decide to buy, you should read the following information about each type of lubricant available. They will help you choose the right type for your gun.

Silicone Oil (Pre-lator) Pellet guns have a metal cylinder and the powder is kept inside. It is very important to keep the cylinder clean since any dirt or dust can damage the powder and it's components. You should get this type of lubricant from a dealer since it contains natural ingredients that are safe to use. The Silicone Pre-lator Oil should be used after cleaning the pellet gun. It is designed to withstand the extreme temperatures.

Gamo Oil (Chrome Oil) This type of lubricant is used to keep the chamber lube fresh. A chamber lube is the fluid that prevents jamming in the gun. Any dirt particles, dust or debris stuck in the bb can cause jamming. If you are using any silicon oil product that does not provide good results or is harsh, then it might not be the right choice. However, if you are going for a chrome finish, then this lubricant is a good option.

Crosman Plunger Oil Plunger tool is usually used with the airsoft guns since it ensures the highest performance level. In fact, if you look at the quality of the product, you would think that it is made up of top grades of material. This type of oil prevents the occurrence of the jamming problem in the pneumatically operated pellet gun. If you do not have the best quality oil in your airsoft pistol, the functioning of your airsoft pistol would suffer a lot due to its constant jamming.

As a rule, if you want to prolong the life of your airsoft gun, you should lubricate it on a regular basis. This is applicable to both your semi-automatic as well as your fully-automatic gun. If you want to keep your gun working efficiently for a long time, you should follow the cleaning procedures mentioned in this article.

This guide helps users to clean the pellet holder of their rifles as well as the barrel. It also helps users to change the oil of their rifles in a better way. You can either clean the oil of your guns manually or you can get a cleaning kit that comprises of special tools and an air compressor.

The first step of the cleaning process is to remove the pellet from the feed tube and remove any dust or debris by wiping the barrel of the rifle with a rag. For cleaning the feeding tube, you need to place a small amount of cleaning agent into the tube before cleaning the entire barrel. The rags you use to wipe the entire barrel should be dipped in some mild dish soap so that the soap does not irritate the metal. This is because most of the corrosion that occurs on the metal occurs because of the friction created while passing the pellet through the barrel. In case, if you find lead residue, you should immediately replace the old cleaning agent.

After ensuring that the barrel is free from dust, you should move on to the front part of the gun and clean it with a cleaning brush. This brush provides adequate cleaning for your guns as well as prevents rust formation. However, the cleaning of the hopper should be done by someone who has experience in this field. You should buy the hopper according to the capacity of the hopper. The main advantage of buying the oil of the hopper is that you do not have to buy a new hopper and you can save your money, especially during the time of repairing of the guns.